top of page

Red Epoxy T-PRO

Description

Simple, fast and efficient. Cold solder, ideal for holes and cracks in all metals and rigid plastics. Withstands 3000 psi pressure, and 180° positive and -35° negative. Cures in up to 45 minutes. Can be used in: Aluminum evaporators heating coils; hot water heating tanks; tubes; valves; automotive engines; radiators; pots; capacitors, etc.

NCM: 39073011

applications

• HVAC & Refrigeration.
• All types of pipes.
• Automotive & Marine.
• Petrochemical Industries & General Industries.

Additional Information

Height: 13cm.
Width: 9cm.
Length: 9cm.
Unit weight: 160gr.
Warranty period: 3 months.
Minimum lot: 12.
Delivery Time: 10 days.
Validity period: 24 months.

 

1st Compress a small amount of resin from the red and white tubes onto a clean surface.
Mix the two parts of the set with a clean spatula or a toothpick. The mixture of the two elements, when uniform, ensures uniform operation.
3rd For better adhesion, clean the repair area with sandpaper and remove all loose encrustations, dirt or other foreign materials.
Do not apply Red Epoxy on surfaces wet with solvent or other liquid. Place a small amount of Red Epoxy on the break or area to be repaired. Be sure to use enough Red Epoxy to cover the area to be repaired.
To accelerate the curing time, use a heat gun or a hair dryer around the area (± 20 cm) where the Red Epoxy was applied. Never blow air directly into the application!
6º S and you want a cure without heating, the estimated time is 24 to 48 hours depending on the temperature and humidity of the place.

 

Note: Do not use a direct static flame to heat Red Epoxy. To prevent overheating, heat and brush slowly and evenly over the repair site. Overheating can result in the product charring which will cause it to lose its effectiveness.

Commercialization

packaging 
 

40 grams

12 pieces

boxes

boxes

24 pieces

boxes

26 pieces

bottom of page